Login Form
Newsletter
| Tein Subaru 2008 STi Mono Flex Coilovers |
 Newly designed and developed for those core drivers seeking the ultimate in street and track performance. Best suited for those drivers whose priority is a high grip level for touge, circuit, and other tarmac driving. Offers both direct feel and a high level of tune-ability that will satisfy the needs of aggressive street and track use. Mono FLEX was tested with high grip tires and/or larger diameter wheels in mind, and are recommended to bring out the full potential of this aggressive suspension system. A. Upper Mount Pillowball upper mounts are included, which increase steering response by use of spherical ball bearings. Also includes front camber adjustment on strut type vehicles. B. Mono-Tube Structure The use of separate chambers for the hydraulic fluid and nitrogen gas, ensures minimal aeration and provides quick dissipation of heat for consistent handling. Larger valving also provides a larger range of damping force adjustment. C. Full-Length Ride Height Adjustment System Allows the user to tune the suspension with separate adjustments for shock/strut length and spring pre-load. This system allows the user to change the vehiclefs ride height without effecting spring rate. Ride Height Front: -1.4" Rear: -1.2" Height Adjust Range Front: -0.8" to -2.4" Rear: +0.3" to -2.2" Spring Rate Front: 559 lbs/in Rear: 448 lbs/in D. 16-level Damping Force Adjustment Feature (combined Compression and Rebound) 16 way damping force adjustment, compression and rebound adjustments are made simultaneously. Specially designed needle valve system allows for damping force adjustment to meet various road and surface conditions. E. Micro Speed Valve Optimizes the low speed damping force range for improved steering response, reduced body roll, and improved stability. F. Protective Coatings Teflon and a specially formulated Flourine treatment are given to the exterior of the coilovers for long lasting protection against the elements. G. Complete Kit Kit includes pre-assembled shocks, springs and pillow ball upper mounts to ensure optimum settings. H. Springs Straight springs are made from high tensile steel, with a strength of 200kgf/sq. mm. Some applications include helper springs. I. Conical Spring Washer Inserted between the bracket lock and lower bracket to prevent the loosening of the lock under various conditions.
Add this page to your favorite Social Bookmarking websites         
|
(0 vote)
 |